• New product series for diverse applications in point and continuous level measurement

New product series for diverse applications in point and continuous level measurement

Jul 11 2018 Read 374 Times

JUMO has introduced the NESOS product series for point level measurement using a float and reed contact to the market for the first time. JUMO is also doing this for level measurement using a float and reed chain.

JUMO has already been producing the high-quality floats as a core element for these devices for around 40 years. Therefore, the combination of JUMO's high level of measurement technology expertise with market changes made the step towards a complete product a logical consequence. The devices are "made in Germany" – developed and produced in Fulda.

Within JUMO NESOS devices is a float with an integrated magnet which uses its magnetic field to switch one or more reed contacts at rising or falling levels.

The tried-and-tested measurement method excels due to its robust technology, cost-saving installation, and assembly. It is also maintenance-free and has a very good price-performance ratio. The measurement can take place in liquid media irrespective of foam formation, conductivity/permittivity, or pressure ratios.

JUMO NESO devices for point level measurement can be used in a wide temperature range from -52 to +240 °C. The devices stand out with a high switching point accuracy of ±2 mm. Additionally the optional installation of a temperature switch, as well as a Pt100 or a Pt1000 temperature sensor, is possible. The switching operation is contact-free, wear-free, and requires no auxiliary energy. During maintenance, the selected setup of the products means that a check can be carried out quickly.

Additionally JUMO NESOS devices for level measurement offer a virtually continuous standard signal from 4 to 20 mA and a temperature range of -52 to +200 °C. The resolution is up to 5 mm. Optional versions with Pt100 or Pt1000 temperature sensors are available.

Approvals for shipbuilding and/or explosion-protected areas as well as a certificate for the Pressure Equipment Directive (PED) are available. As a result, the products can be used in many industrial and process engineering applications.

Reader comments

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Post a Comment

Digital Edition

International Environmental Technology April 2019

April 2019

In This Edition Business News - New appointment to boost noise and vibration specialists - Restek and LECO collaborate in worldwide supply agreement - Evonik catalyst in the life support sy...

View all digital editions


64th ISA Analysis Division Symposium

May 05 2019 Galveston, TX, USA

Ozwater 2019

May 07 2019 Melbourne, Australia


May 15 2019 Seoul, South Korea

FlowExpo 2019

May 16 2019 Guangzhou, China

AIHce 2019

May 20 2019 Minneapolis, MN, USA

View all events