New Water Alarm Instrument WWG

The new WATCHDOG Water Alarm WWG from AFRISO (Germany) is designed to detect electrically conducting liquids in rooms and areas where burst pipes, leakages, back flows and flooding may occur and also for the monitoring of catchment areas, manholes, pipe and cable ducts as well as transport and storage locations. The Water Alarm WWG consists of a control unit, a wall mounting rail probe or an alternative floor mounting
probe, which are connected to the controller up to a distance of 50 m. The control unit contains all indication and operating elements as well as two voltage-free output relays. If an unwanted leakage of an electrically
conducting liquid occurs, visual and audible alarms are initiated and an alarm mute facility is provided to silence the audible alarm either at the control unit or from an external location. The Water Alarm WWG will revert
back to normal operation only when the sensing probe is dry again. The WATCHDOG Water Alarm WWG is supplied with 230 VAC and is designed for simple wall mounting but may also be installed in consoles or control panels (using an optionally available mounting frame). WATCHDOG Alarm Instruments can also be retro-fitted with a special sealing set which makes them suitable for use in dirt laden or spray water areas (IP 54). In order to achieve maximum operational safety, AFRISO Event Reporting Systems can also be connected to the Water Alarm WWG. The user of the installation is then notified immediately via the Internet, by Email, SMS or phone, if an alarm condition occurs.