Water/Wastewater

  • GazCal Chlorine Gas Generator for Site and Laboratory Test and Calibration

GazCal Chlorine Gas Generator for Site and Laboratory Test and Calibration

Mar 01 2018 Read 472 Times

Some gases are highly reactive and difficult to handle and store using traditional cylinders. Chlorine is one of these gases. With traditional cylinders, accuracy and shelf life of stored gas is extremely poor. To overcome such problems, the GazCal Gas Generator was developed for Chlorine (Cl2) by Euro-Gas Ltd.

The GazCal is a rugged, portable, battery-operated unit suitable for test and calibration both in the laboratory and on-site.

Utilised across many industries worldwide, it proves particularly popular with water authorities and for water treatment.

The unit needs little warm-up time and can be operated by non-technical personnel, providing fast test and calibration source. It is also used as surrogate gas for the cross-calibration of Chlorine Dioxide ClO2, Ozone O3 and Fluorine F3 equipment.

Housed in portable black robust carrying case, measuring just 240mm x 110mm x 220mm, the GazCal has a generating range of 0.5ppm – 20ppm at 0.5 or 1.0 litre/minute flow rate options. Low range, mid range and full range Chlorine calibration options are offered.

A particular advantage of the GazCal Chlorine Gas Generator is that cell life is only consumed when the unit is switched on and used for calibration purposes. Unlike cylinders of chlorine gas mixtures, where there will be a shelf life of up to 6 months normally. Gas cylinders will only provide a defined gas mixture concentration too, for example 5ppm Chlorine. But the GazCal Generator is completely adjustable in the range 0.5ppm to 20.0ppm in 0.1ppm increments. Moreover, low concentrations of Chlorine gas mixtures can reliably be produced with the GazCal including 1ppm and 2ppm levels whereas it is difficult to provide cylinder stability at such concentration levels.

Read comments0

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.


Digital Edition

International Environmental Technology December 2018

December 2018

In This Edition Business News - Celebrating 50 years of Swiss engineering in Manchester - Taking a closer look at algal blooms - Sonardyne acquires maritime and marine science technology sp...

View all digital editions

Events

Abu Dhabi Sustainability Week

Jan 12 2019 Abu Dhabi, UAE

World Future Energy Summit (WFES 2019)

Jan 14 2019 Abu Dhabi, UAE

Energy from Biomass Combustion

Jan 15 2019 Leeds, UK

National Biodiesel Conference + Expo

Jan 21 2019 San Diego, CA, USA

Abwasser Praxis

Jan 23 2019 Offenburg, Germany

View all events