Portable/Field Testing

  • New High-End Visual Infrared Thermometer with Higher Resolution Plus Alarms and Time-Lapse Features

New High-End Visual Infrared Thermometer with Higher Resolution Plus Alarms and Time-Lapse Features

Oct 02 2013 Read 1834 Times

Fluke (UK) has introduced the high-end Fluke VT04 Visual Infrared Thermometer, a troubleshooting tool with an infrared heat map which offers higher resolution as well as temperature alarms and time-lapse features. Fluke Visual IR Thermometers fill the gap for when a single-spot temperature reading is not enough and a high-resolution thermal image is more than users need: the one tool combines the visual insight of a thermal imager, the visual images of a digital camera, and the point-and-shoot convenience of an IR thermometer.

Compared to the VT02, the Fluke VT04 offers a wider 28°x28° field of view for improved scanning and up-close evaluation and four times sharper images. It also features a Hi/Lo temperature alarm which enables hot spots to be found in seconds, and time-lapse functionality which automatically monitors equipment over time or automatically captures images after an alarm has been triggered. Images are saved to a micro-SD card, eliminating the need to write down single or multiple measurements: analysis and reporting software is included.

Using the new Fluke VT04 is far faster for conducting inspections of electrical, industrial, HVAC/R and automotive applications than an infrared thermometer, which requires multiple readings and manually recorded results.

The Fluke VT04, like the VT02, instantly detects problems using blended thermal and digital imagery. It will display and save images as full visual, full infrared, or in three blended modes (25, 50, and 75 percent). Markers pinpoint hot and cold spots indicating the hottest temperature with a red box and the coldest with a blue box. A temperature reading is provided at the centre point.

Affordable, compact, and intuitive, the Fluke Visual Infrared Thermometers operate with focus-free simplicity, expanding the user base from senior to junior technicians and broadening the applications for in-house staff as well as creating new business opportunities for service contractors. Images can be imported into SmartView analysis and reporting software, included with the VT04 and VT02, to produce professional reports that document problems detected, or repairs made, for management and customer review.

Reader comments

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Post a Comment




Digital Edition

International Environmental Technology April 2019

April 2019

In This Edition Business News - New appointment to boost noise and vibration specialists - Restek and LECO collaborate in worldwide supply agreement - Evonik catalyst in the life support sy...

View all digital editions

Events

IFSE

Apr 25 2019 Bangkok, Thailand

64th ISA Analysis Division Symposium

May 05 2019 Galveston, TX, USA

Ozwater 2019

May 07 2019 Melbourne, Australia

ENVEX

May 15 2019 Seoul, South Korea

FlowExpo 2019

May 16 2019 Guangzhou, China

View all events