• Optimum condition and process monitoring

Environmental Laboratory

Optimum condition and process monitoring

Sep 26 2018

For the evaluation of dynamic signals such as acceleration as well as analogue signals, ifm electronic's proven 6-channel VSE type diagnostic systems have an industrial Ethernet interface to exchange data directly with a PLC.

Signals from the connected sensors are continuously processed in the VSE15x modules to calculate the characteristic values for machine condition monitoring that are defined in a parameter set.

Deterioration in quality is recognised early - avoiding rejects and expensive damage. Using the fieldbus connection measured values can be directly indicated in the PLC and monitoring can be perfectly adapted to the operating states and processes of the machine.

Auxiliary parameters of condition monitoring such as rotational speed, trigger for operating states and non time-critical alarms can be directly transmitted via the fieldbus and no longer need to be exchanged via hard-wired analogue and digital signals. This not only reduces wiring complexity but also saves the cost of providing the corresponding inputs/outputs on the PLC. Find out more by visiting ifm electronic’s stand 85 at WWEM


Digital Edition

AET 31.2 Buyers' Guide 2024

February 2024

In This Edition Buyer's Guide Directory - Product Listings by Category - Suppliers Listings (A-Z) Water / Wastewater - Methane Emissions Analysis at Berlin Wastewater Facility - Inter...

View all digital editions

Events

UzChemPlast Expo

Apr 03 2024 Tashkent, Uzbekistan

analytica 2024

Apr 09 2024 Munich, Germany

ChemBio Finland 2024

Apr 10 2024 Helsinki, Finland

View all events