• Accurate and reliable enables fail-safe operation of combustion systems

Gas Detection

Accurate and reliable enables fail-safe operation of combustion systems

May 22 2023

LogiDataTech’s dynamic MF-Oxy is an oxygen measurement system that can determine residual oxygen content in exhaust gas from combustion plants precisely and reliably. Therefore, with the use of a coupled controller, a plant operator can minimise the excess air specified for safety reasons, optimise combustion in the boiler and thus increase efficiency. 

In this way it is possible to compensate for fluctuations in fuel quality for modern wood firing. Unlike Lambda probes, which measure the relative oxygen content, this robust measuring system determines the absolute content. For this reason, fluctuations in air pressure, humidity and temperature have no effect on the accuracy of the measurement. The system is calibrated electronically, without the need for reference gas or human intervention, in atmospheric air at the end of the furnace´s ventilation phase, thereby reducing maintenance work. The measuring range is defined from 0.1-25Vol% oxygen. The system is offered with a temperature range of 0-250°C or 0-350°C, and a range of probe lenghts and two types of sinters.


Digital Edition

AET 28.2 April/May 2024

May 2024

Business News - Teledyne Marine expands with the acquisition of Valeport - Signal partners with gas analysis experts in Korea Air Monitoring - Continuous Fine Particulate Emission Monitor...

View all digital editions

Events

A&WMA ACE

Jun 24 2024 Calgary, Canada

Sensors Converge

Jun 24 2024 Santa Clara, CA, USA

The National Safety Show

Jun 25 2024 Auckland, New Zealand

Water Africa

Jun 26 2024 Accra, Ghana

SGEM 2024

Jun 29 2024 Albena, Bulgaria

View all events