Water/Wastewater
SpectroDirect – Spectrophotometer for Water and Waste Water Testing
Sep 19 2008
The instrument is equipped with a wide range of preprogrammed methods based on the proven range of Lovibond® tube tests, tablet reagents, liquid reagents and powder reagents (Vario Powder Packs). The light source is a tungsten halogen lamp with flash function. The lamp is
switched on only momentarily during of the measurement process, so there is no need for a warm-up period.
The SpectroDirect is ready to perform a self-test as soon as it is switched on.
The light passes through an entry slot to the monochromator, where it is split into spectral ranges. The monochromator is a holographically produced, transparent grating. The movable mirror ensures that light of the desired wavelength is focused automatically so that it passes through the exit slot, into the sample chamber and therefore through the water sample. The light that is not absorbed by the sample travels to the silicon photodiode detector. This signal is then evaluated by a
microprocessor and shown as a result in the display.
New methods
Test methods are continuously updated to suit market requirements. New methods can be added easily and quickly using software available on our website. You can find updates for new methods and additional languages
on our website at www.tintometer.de.
Digital Edition
AET 31.2 Buyers' Guide 2024
February 2024
In This Edition Buyer's Guide Directory - Product Listings by Category - Suppliers Listings (A-Z) Water / Wastewater - Methane Emissions Analysis at Berlin Wastewater Facility - Inter...
View all digital editions
Events
Apr 03 2024 Tashkent, Uzbekistan
Salon Analyse Industrielle & Instrumentation
Apr 03 2024 Paris, France
Apr 09 2024 Munich, Germany
Apr 10 2024 Helsinki, Finland
4th International Conference Waters in Sensitive and Protected Areas
Apr 10 2024 Pula, Croatia