• First thermal imaging building inspection system

Health & Safety

First thermal imaging building inspection system

Jan 27 2020

FLIR Systems, Inc. have launched the FLIR MR277 building inspection system, FLIR Systems’ first moisture meter with Infrared Guided Measurement (IGM™) to offer Multi-Spectral Dynamic Imaging (MSX®) technology. This all-in-one, thermal-enabled moisture meter with hygrometer provides users with a full understanding of problem areas by enhancing IGM thermal images with visual details so they can quickly find moisture, air leaks, and insulation voids.

Designed for restoration, remediation, and building management professionals, the enhanced FLIR MR277 includes features needed to identify, diagnose, fix, and document moisture and building envelope problems. The FLIR Lepton® thermal imaging sensor powers IGM, visually guiding users straight to the source of building-related issues. Once a problem is located, the built-in pinless sensor enables quick, non-invasive moisture detection. Inspectors can then streamline diagnosis and documentation by using the built-in Bluetooth® to connect via METERLiNK® to mobile devices running the FLIR Tools® mobile app. This allows users to upload measurements and images from the job site to easily complete and share full reports with their customers.

The MR277 features a vibrant display screen that is 50 percent larger than previous FLIR moisture meter models, making it easier to identify problem areas visually and allowing users to view multiple parameters simultaneously, including humidity levels, dew point, and vapor pressure. A dual-camera system powers FLIR MSX, which adds visual details such as edges, writing, and patterns to full thermal images. The MR277 can display and record MSX, thermal, and visual images, with storage for up to 15,000 images in the internal memory.

The MR277 includes an MR02 removeable pin probe in addition to the built-in pinless sensor to allow users to verify the presence of moisture and take accurate, pin-based measurements with a single tool. The MR13 moisture hygrometer is also included; this humidity and temperature sensor measures relative humidity and is field-replaceable, thereby minimizing downtime to help keep professionals on-site to quickly complete the job.


Digital Edition

IET 34.2 March 2024

April 2024

In This Edition Gas Detection - Biogas batch fermentation system for laboratory use with automatic gas analysis in real time Water/Wastewater - Upcycling sensors for sustainable nature...

View all digital editions

Events

Analytica Anacon India & IndiaLabExpo

Apr 15 2024 Mumbai, India

World Future Energy Summit

Apr 16 2024 Abu Dhabi, UAE

Analitika Expo 2024

Apr 16 2024 Moscow, Russia

Ecomondo Mexico

Apr 17 2024 Guadalajara, Nexico

IE Expo China 2024

Apr 18 2024 Shanghai, China

View all events