Air Monitoring

  • Introducing the ST5 Evo Automatic Isokinetic Sampler

Introducing the ST5 Evo Automatic Isokinetic Sampler

Apr 02 2018 Read 875 Times

Matts Monitors have introduced Dado Lab’s ST5 Evo to the UK market. The ST5 Evo is the evolved version of the popular ST5 Isokinetic sampler, developed to be easier and cheaper to use and maintain, whilst improving health and safety. The perfect companion for stack testers.

The ST5 Evo is composed of two units, the control unit and the pump unit. The Evo is designed to allow the user to take only the control unit (6kg) up to the sampling point, while the heavy pump unit can be left on the ground and connected only by Inexpensive suction tube and power cable. The ST5 Evo can be integrated in any existing sampling line even from other manufacturer probes or devices.

Sampling line (Out-stack) composition:

1) Gooseneck with interchangeable nozzles

2) Type S Pitot Tube

3) HP5 Heated Probe mod.

4) Inner tube (and optional secondary gas Sampling line)

5) Slide and Lock Device

6) HUB for Outstack filterholder and 4DL manifold

7) Filterholder

8) Impingers train for water condensation

9) Athermal Box w/ support foam

10) Silica Gel Protection Trap

11) Umbilical cable (including 4TC + Pitot tube + 2 Thermoregulators + Suction tube)

12) ST5 Evo Automatic Isokinetic Sampler

The ST5 Evo has built-in thermoregulators which are programmable directly from the instrument. They can pilot the thermoregulation of other manufacturers’ devices.

Operators also appreciate the STS Evo’s lower connection costs - With other solutions, if you need very long umbilical cables, the costs of those are very high. The ST5 Evo Control Unit connects to the isokinetic probe, with a short umbilical cable, usually 5 meters is enough, and then the connection between the Control Unit (CU) and the Pump Unit (PU) is achieved with a normal suction tube and power cable which is very cheap and easy to replace.

This lighter weight sampler is easy and inexpensive to upgrade, offers remote data transfer and exceeds all EN 13284 and EN 1948-1, with its velocity and flowrate determination meeting EN16911 and EN15259. Matts Monitors can also supply systems adapted for all micro-pollutant side sampling.

Reader comments

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Post a Comment





Digital Edition

International Environmental Technology October 2020

October 2020

In This Edition Business News - Global valve event to incorporate technology in the battle against coronavirus - New ASTM International standard will help test water quality - Acquisition t...

View all digital editions

Events

WETEX 2020 (part of Green Week)

Oct 26 2020 Virtual event

Testing & Control

Oct 27 2020 Moscow, Russia

LABComplEX

Oct 27 2020 Kiev, Ukraine

KHIMIA 2020

Oct 27 2020 Moscow, Russia

Water Expo China

Oct 28 2020 Beijing, China

View all events