2006-2016: 10 years of continuous dioxins monitoring in Italy. Which assessment for which perspective?

HYDROCARBON MONITORING AND INSTRUMENT CALIBRATION METHODS

Oct 06 2014

Author: Tibor Bernath on behalf of CEM

Free to read

This article has been unlocked and is ready to read.

ABSTRACT
For VOC monitoring several different detectors are well known, for example semiconductor based detectors, pellistors, optical detectors with infrared light, catalytic combustion detectors, flame temperature detectors, photoionisation detectors and flame ionisation detectors (FID). The most widely used detector is the FID.

Air monitoring

ABSTRACT The U.S. Environmental Protection Agency (EPA) has undertaken an evaluation of particulate matter continuous emission monitoring systems (PM CEMS)...

U.S. ENVIRONMENTAL PROTECTION AGENCY’S EVALUATION AND APPLICABILITY D...

Air monitoring

Summary / Abstract Electrostatic precipitator particle removal efficiency is governed by the level of charge that the particles gain in the ESP. The ELPI...

Measurement of PM Emissions and Electrostatic Precipitator Charging Eff...

Portable & field testing

Introduction The continuous emission monitoring of the different compounds which are emitted by industrial facilities is an important topic to approve the...

Long-Term Sampling - A Method for Continuous Emission Monitoring of Dio...

Air monitoring

Dioxins and furans are produced by an incomplete combustion of organic and chlorinated compounds Generated by stationary sources such as waste incine...

New operating mode for on-line analysis of dioxin emission from statio...

Digital Edition

AET 29.2 May 2025

May 2025

Water / Wastewater- From Effluent to Excellence: Microbiological assessment of a containerized modular water reuse pilot system- Without water everything comes to a haltAir Monitoring- Probe Sampli...