Mercury measurement for increasingly stringent emissions controls in the oil and gas industry
A chemical element, mercury is found both naturally and as an introduced contaminant in the environment, mainly from high-temperature industrial processes such as alkali and metal processing, incineration of coal and oil in electric power stations, foundries, waste combustion and oil and gas processing. In gas production and processing plants, trace levels of mercury could range between 0 and up to 2000 µg/Nm3 in products, depending on the source. It poses a formidable threat to the safety of humans and capital equipment, because of this propensity to amalgamate with the materials of construction used for pipelines and equipment.
Mercury rapidly moved up the pollution control agenda in the European Union (EU), the USA and Asia prior to the legally binding UNEP global treaty on mercury, the Minamata Convention, adopted in 2013 and signed by 128 countries. The objective of the Minamata Convention is to protect human health and the environment from anthropogenic emissions and releases of mercury and mercury compounds. In late 2011, the US EPA finalised the Mercury and Air Toxics Standards (MATS), the first national Clean Air standards to reduce emissions of mercury and other toxic air pollutants from new and existing coal and oil-fired power plants. In the EU, the Community Strategy concerning mercury was adopted in 2005 and reviewed in 2010. It focuses on mercury emissions to air, the banning of mercury exportation (including certain mercury compounds) and enforcing restrictions on products containing mercury and industrial processes using mercury. In regard to industrial emissions of mercury, the EU Industrial Emissions Directive (IED) addresses the issue via the Reference documents on the Best Available Techniques (BREF). Moreover the recently updated National Emission Ceiling Directive (NECD) introduced the monitoring of mercury emissions as a requirement; on the basis of the reported national emissions the EC will assess their impact on achieving the air quality objectives and will consider measures for reducing those emissions.
As legislation and action plans grow in number and stringency, the importance of monitoring and quantifying emission pollutants in an accurate and transparent manner are becoming priorities. Typical analytical instruments in this application include Atomic Absorption Spectrometers (AAS) and Inductively Coupled Plasma (ICP) mass spectrometers.
The Linde Group was the first company to offer to the market gaseous mercury calibration standards for the monitoring and detection of emissions. A comparison is made between these calibration gas standards and other methods of calibrating analytical instruments.
Free to watch
Sessions are free to watch. Please login to view this session or create an account.
Mr Mike Hayes (The Linde Group)
In This Edition Water/Wastewater - Continuous remote water quality monitoring networks Environmental Laboratory - The Important Role of ICP-MS in Understanding the Toxicological Link Be...
View all digital editions
Feb 24 2024 San Diego, CA, USA
Feb 28 2024 Chennai, India
Feb 29 2024 Dhaka, Bangladesh
Feb 29 2024 Kathmandu, Nepal
Mar 04 2024 Mumbai, India