Videos
Upcoming Events
Join Ian Ross, Ph.D., FRSC, for a deep dive into the challenges and opportunities in PFAS analysis. With over 30 years' expertise, Ian will explore the complexities of PFAS contamination, provide insights on innovative analytical methods, and discuss emerging solutions in environmental management. Don't miss this expert-led session. Key learnings from this webinar Understanding PFAS complexity: learn about the unique challenges posed by PFAS contamination, including its persist...
Videos
Past Events
Nick Molden is the founder and CEO of Emissions Analytics, which specialises in the measurement of emissions and fuel efficiency for passenger and commercial vehicles, as well as non-road mobile machinery. Molden has been a persistent advocate for independent emissions testing, has helped to develop standards and with his co-founder, Massimo Fedeli, established Allow Independent Road-testing, or AIR, a non-profit which produces an online emissions index, the AIR Index, that enables consume...
PFASs (per- and polyfluorinated alkyl substances) are a class of almost 10.000 organofluorines. These man-made compounds - also designated «forever chemicals» – are highly persistent and at least some of them tend to accumulate and biomagnify in the environment. For that reason, more and more of these compounds are declared toxic as they pose a risk to human and environmental health. In a joint eLearning session, Theresa Steurer and Iris Reber from Metrohm International Headquarters,...
Gas chromatography (GC) is one of the most important analytical technologies, but its power relies on the availability of sensitive detectors, able to quantify a range of analytes as extensive as possible. This webinar will show the Pulsed Discharge Detector (PDD) to meet this demand by combining true universality in detection, with a broad dynamic range, and sensitivity down to the ppm and ppb range. After setting the PDD in relation to other detectors for GC, generally regarded as univer...
This eLearning demonstrates how to consolidate routine analysis of multiple parameters on a modular platform. Increasing numbers of samples, multiple parameters to be determined, mandatory compliance with national and international standards – water works, bottlers of mineral water and some sectors of the process industry all face the same challenge: How to cope with more analytical tasks while human resources in the laboratory are limited? In this eLearning session we demonstrate how...
The importance of Safety Integrity Levels and Functional Safety in Gas and Flame Detection. Gas and flame detection plays an essential role in reducing the hazards associated with toxic and flammable gases. SIL and Functional safety are extremely important parameters to consider in the design, construction, specification, and installation of a gas and flame detection system. Safety Integrity Limits or SIL are related to the broader topic of Functional Safety. The term SIL is intended to...
At our recent Continuous Emissions Monitoring event, Juergen Reinmann of ENVEA gave a 15-minute presentation of a recent investigation into the use of sorption traps in mercury monitoring. Mr. Reinmann discusses: The benefits of sorption traps as an alternative method The compliance of the method The utility of sorption traps for measuring lower ELVs The potential for raising the durability of the method at higher temperatures
At our recent Continuous Emissions Monitoring event, Andrew Dixon of Gasmet gave a presentation on the quality assurance of mercury monitoring systems. Mr. Dixon discusses: The recent history of quality assurance in mercury monitoring Potential improvements to EN14181:2014 Which reference materials should be standard The design of test gas generators for quality assurance
At our recent Continuous Emissions Monitoring event, Matthias Klostermann of DURAG Group gave a 15-minute presentation on the value of continuous emissions monitoring for optimising mercury reduction initatives. Mr. Klostermann discusses: Overview about the global market for continuous mercury monitoring Introduction to the product solution we are offering Sharing international experience in regards of emission monitoring Application examples
Biofuels, mainly derived from vegetable oils or the fermentation of plant material, have gained importance over the last few decades as more sustainable and environmentally friendly alternatives to fossil fuels. However, the production of raw materials for biofuel production has led to significant deforestation and competition for agricultural farmland with traditional crops used as staple food for humans and animals. To mitigate effects, new sources like algae have been developed for biofuel...
Stephen Harrison talks to Anurag Dhumal MSc in engineering and energy technology. This short discussion looks at questions like: What is dry methane reforming? What is the difference between dry methane reforming and steam supported dry methane reforming? What catalysts are used in the processes you described, are they the same or similar? During Dry methane reforming, how does one protect the catalyst? How does the carbon build up get suppressed? What levels of steam are used i...
Digital Edition
AET 28.4 Oct/Nov 2024
November 2024
Gas Detection - Go from lagging to leading: why investment in gas detection makes sense Air Monitoring - Swirl and vortex meters will aid green hydrogen production - Beyond the Stack: Emi...
View all digital editions
Events
Dec 11 2024 Shanghai, China
Jan 12 2025 Abu Dhabi, UAE
Jan 14 2025 Abu Dhabi, UAE
Jan 20 2025 San Diego, CA, USA
Carrefour des Gestions Locales de L'eau
Jan 22 2025 Rennes, France