• NEW PrimeLab 2.0 - The Ultimate Photometer For Water Testing – PrimeLab 2.0

Water/Wastewater

NEW PrimeLab 2.0 - The Ultimate Photometer For Water Testing – PrimeLab 2.0

Jul 13 2021

140 parameters, 18 wavelengths, 5.5’’ touch-display, WiFi, USB, camera, Bluetooth and much more

Water-i.d. proudly presents its latest photometer for water testing, the PrimeLab 2.0 which can truly be called "The Ultimate Photometer".

The PrimeLab 2.0 supersedes the PrimeLab 1.0 which has been on sale since 2013 and which already was setting benchmarks for the industry.

The amazing PrimeLab 2.0 offers users more than 140 parameters to flexibly choose from and an 18 wavelengths parallel reading sensor-set-up -compared to common high-end photometers for highest accuracy. The PrimeLab 2.0 is equipped with a 5.5’’ colour-touch-HD-display as well as with a WiFi option to communicate directly or via mobile phone with the free and powerful LabCOM software, app and cloud. In addition a QR-scanning camera is included to recognize reagents, water sources and much more. The PrimeLab 2.0 has also the capability to connect electrodes via USB for pH/EC/ORP and temperature for measuring and managing these results.

Just like with PrimeLab 1.0, the users only pay for what they need by choosing only those parameters of interest. Operators have the option to add more parameters at any time by purchasing and entering an activation code.

The PrimeLab 2.0 offers a step-by-step guidance for all parameters including animated graphics and many different languages to suit users across the globe.

Adapters simplify the change between 24mm / 16mm and 1ml-Eppendorf cuvettes to ensure the best path-lengths for the different methods. Different path lengths are needed for example for the determination of Chlorine, COD, the 1-hour quantitative and certified Legionella test or for using the in-built 90° board, NTU-Turbidity, PTSA and fluorescence. These are just a few of the mentioned more than 140 different parameters the PrimeLab 2.0 has to offer.

A rechargeable 8,400 mA inbuilt Li-Io-battery ensures high performance and long operation time.

Memory in the GB-range allows the storage of almost unlimited test results, all connected to “accounts” (water sites) which the user can enter individually.

Both, water-sites and test results, can be instantly uploaded direct or via mobile phone to the free of charge LabCOM cloud, when either WiFi is activated or a GSM/USB-stick is used. By doing this test data will be available worldwide, instantly and password protected.

The free of charge LabCOM app/software/cloud, already well tried and tested with the PrimeLab 1.0 and PoolLab, offers plenty of functions to the user, including an admin-module. This module uses a traffic light system to warn about measurement results out of range or even measurements which have not but should have been performed. Such “rules” can be individually set up to suit the specific needs of the user.

More info under water-id and primelab.


Digital Edition

Asian Environmental Technology September 2021

September 2021

In This Edition Business News - Blackline Safety appoints first Chief Marketing Officer - Australia-UK partnership for ambient air monitoring - Endress + Hauser awarded rating for sustainab...

View all digital editions

Events

Ilmac Basel - NEW DATES

Oct 19 2021 Basel, Switzerland

EcoEnergy Expo 2021

Oct 19 2021 Kiev, Ukraine

LABComplEX

Oct 19 2021 Kiev, Ukraine

smagua 2021

Oct 19 2021 Zaragoza, Spain

Lankawater '21 - postponed to 2022

Oct 20 2021 Colombo, Sri Lanka

View all events