Gas Detection

  • New IR technology set to revolutionise refrigerant leak detection with astonishing performance to price ratio

New IR technology set to revolutionise refrigerant leak detection with astonishing performance to price ratio

Sep 27 2018 Read 397 Times

When it comes to refrigerant leak detection, the predominant sensing technologies are undoubtedly Non-Dispersive InfraRed (NDIR) and Metal-Oxide Semiconductor (MOS). NDIR is the best performing technology, but its cost has so far prevented a widespread use in light commercial and residential applications, where MOS has remained the predominant choice.
Although MOS requires periodic calibration (normally every 6 months or less) and replacing every 2 to 4 years, other than suffering from interference from many chemicals other than the target gas and from dependency from environmental conditions, the affordable price has tipped the balance in its favour in settings like food retails, hotel rooms, apartments and offices.
This is about to change with the new IREF LITE series from N.E.T. – a complete line of NDIR sensors for refrigerant gas detection, set to hit the market at an astounding price.
This will make the gas selectivity, accuracy, poison immunity and extended lifetime of NDIR technology affordable for any setting, dramatically improving gas detection performances in the HVAC-R market, improving occupants safety and lowering cost-of-ownership.
The IREF Lite series from N.E.T. includes solutions for R32, R1234yf and R1234ze in %LEL range. In 2019, the series will be extended to several other refrigerant gases in ppm range.
The analogue output provides a user-programmable threshold output consisting of different voltage levels – by default, 10% LEL=1V, 25% LEL=1.5V. The user can freely select the output level, the corresponding output and the hysteresis of the thresholds through Modbus RTU commands.
In fact, digital communication via Modbus RTU commands allows complete access to the sensor functioning parameters, diagnostics and periodic recalibration.
The standard industrial 7-series size and pinout fit existing detectors and is significantly smaller than most NDIR-based alternatives available.
In order to guarantee maximum safety, IREF LITE has been developed in order to meet SIL1 requirements (SIL is a quantitively measurement of the ability of a system to carry out its safety function when called to do so).

Read comments0

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.


Digital Edition

International Environmental Technology October 2018

October 2018

In This Edition Gas Detection - Flammable Gas Dectection In Coal Mines - Protective concepts in combustible gas and vapor detection - The only line of gas sensing elements with SIL2 capabil...

View all digital editions

Events

WETEX 2018

Oct 23 2018 Dubai, UAE

Pol Eco System

Oct 23 2018 Poznan, Poland

WASMA

Oct 23 2018 Moscow, Russia

Watec Italy

Oct 24 2018 Cremona, Italy

FiGas

Oct 25 2018 Lima, Peru

View all events