Environmental Laboratory
Clean Room Panel for Monitoring Humidity, Temperature and Low Dew Point
Aug 08 2016
The CRP1 clean-room panel, from Rotronic (Switzerland), is characterised by its compact construction and simple handling. Its HygroClip2-compatibility allows humidity to be registered to the highest degree of accuracy. Depending on demand and application any other Rotronic probe can be connected. The data can be transferred via analogue outputs or MODBUS. Measured values, alarms and measurement curves are shown on the display.
Features: Monitors humidity, temperature and low dew point, designed specifically for clean rooms, works in combination with the HygroClip2-series but also with any other Rotronic probe (customised to your needs), FDA- and GAMP-compatible, digital communication via MODBUS RTU / HW4, analogue output signals freely configurable, stainless steel front panel highly resistant to chemicals, alarm output acoustic, or via relay or LCD display, and simple probe calibration outside the room being monitored.
The Clean Room Panel CRP1 is the obvious choice wherever precise measurement of humidity and temperature is of vital importance, and a high degree of cleanliness must be maintained. Such as clean rooms in hospitals, in the pharmaceutical, electronics or foodstuffs industries and other applications in which humidity and temperature are monitored. The comprehensive functional capabilities of the CRP1 can be used for many measurement and control tasks.
In combination with the Rotronic HC2-LDP probe the CRP1 specially meets the requirements of monitoring dry air in dompressed-air equipment and battery fabrication.
Digital Edition
IET 34.2 March 2024
April 2024
Gas Detection - Biogas batch fermentation system for laboratory use with automatic gas analysis in real time Water/Wastewater - Upcycling sensors for sustainable nature management - Prist...
View all digital editions
Events
Apr 30 2024 Melbourne, Australia
Apr 30 2024 Birmingham, UK
May 03 2024 Seoul, South Korea
May 05 2024 Seville, Spain
May 06 2024 Minneapolis, MN, USA